GDR series was born for force on force training
TITAN POWER 11.1V 3000 mAh  NUNCHUCK Li-Ion BATTERY T-Plug (Dean)
$38.85

TITAN POWER

TITAN POWER 11.1V 3000 mAh NUNCHUCK Li-Ion BATTERY T-Plug (Dean)

DISCLAIMER
 I agree with the terms and conditions
  I am 18 years of age or older
  Billing and shipping address must match

Voltage: 11.1v
Capacity: 3000mAh
Connector: T-Plug (Dean)
Style: Nunchuck
C Rating: 16C (equivalent of 1600mAh 30C, a common Airsoft li-po variant)

Size: 19.5mm (0.77in) thick, 132mm (5.2in) long

No Puff
Titan Power batteries will never puff and become unsafe like lipo will that have been either neglected or simply aged over time.

No Memory
Titan Power batteries can be charged from empty or nearly full without damaging the battery. Even if your battery gets low and your device cannot cycle, the battery is still within is safe operating range and can be charged safely back to 100%.


More Capacity
Titan Power batteries can store on average 2-5 times the energy of other Airsoft batteries, keeping you in the working longer.

No Fade / Lasts Forever
Titan Power batteries can hold a charge for months and still be ready to use on game day. An extreme example is a pack used for testing, charged in 2012, which still holds 88% of its life in 2018. These packs can also be charged over 300 times and still store 80% of its original capacity.

 

LITHIUM ION SAFETY

Lithium-Ion batteries store a ton of energy, and while these can endure hard impacts, long drains of high power, etc, they do have their limits, and if pushed too hard, they can be very dangerous.

As a general rule, if you store them 30% charged in a cool, safe place away from anything flammable, charge them slowly and under supervision, discharge them at the rated C-ratings with proper ventilation/cooling, treat them nice and don't do anything crazy like shorting them out or crushing them, they will not cause any issues and last a very long time.

The full legal disclaimer is below:

Warning: procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury. For the purposes of this document, Li-ion will be described as “Batteries”.


Handling and storage
-Never alter, puncture, or impact Batteries or related components.
-Do not directly connect the terminals with metal objects. This will short-circuit Batteries, resulting in heat and electrical discharge.
-Never store loose Batteries together, the Batteries’ terminals may contact one another causing a short circuit.
-Never expose batteries to extreme temperatures or direct sunlight. The temperature range must be between 40-120F (4-49C).
-Always verify voltage of Batteries that have been out of service for greater than six (6) months.
-Always charge/store Batteries in a non-conductive, fireproof container or bag.
-For best results, store Batteries at approximately 1/2 of the capacity listed on the batteries’ label.

Before the First Charge
-Make a visual and physical inspection of Batteries for any damaged or loose leads or connectors, damaged packaging, or other irregularities which may cause a short circuit and eventual fire.
-Verify that the positive terminal of the Batteries is connected to the positive terminal of the charger. Confirm polarity with a voltmeter if unsure.
-Check the voltage of Batteries using a voltmeter to make sure Batteries have the voltage of the capacity listed on the Batteries’ label.

Charging
Always refer to your charger’s manual for correct procedures and safety information. In addition to your charger's manual, the warnings and guidelines listed below must be followed to avoid possible property damage and injury.
-Always use a compatible balanced mode charger, specifically designed for the chemistry of the battery you are using.
-Always charge batteries in an open area away from flammable materials, liquids, and surfaces.
-Never charge Batteries inside of the model.
-Never charge Batteries that are hot to the touch (above 100F) DO NOT handle Batteries until they are cool.
-Always set the charger to proper cell count and/or voltage listed on Batteries’ labels.
-Never charge at a rate greater than 1/2C (Half the capacity of Batteries in amp hours)
-Always check the voltage of Batteries before each charge session in order to ensure they are at or above the minimum safe starting voltage. If starting voltage is below recommended levels then Batteries have been over-discharged or have experienced a failure and should NOT be charged.
-Never overcharge Batteries beyond the capacity listed on Batteries’ labels.

Safety
If any time Batteries become damaged, hot, or begin to swell, discontinue charging or discharging immediately. Quickly and safely disconnect the charger. Then place the Batteries in a safe, open area away from flammable materials in an approved Li-po bag to observe. After one hour, remove the Batteries from service. Do NOT continue to handle an attempt to use, or ship the Batteries. Failure to follow these procedures can cause damage to Batteries, personal property, or cause serious injury. Damaged or swollen Batteries can be unstable and very hot. DO NOT touch Batteries until they have cooled. Dispose of Batteries in the manner required by your city, county, state, or country. In the event of a fire, a Class D, dry chemical fire extinguisher must be used.

Discharging
-Never discharge Batteries at amperage rates higher than specified on Batteries’ labels.
-Never allow the temperature of Batteries to exceed temperatures advised by the manufacturer.
-Never discharge batteries to a voltage below which they are rated by the manufacturer when measured under load (connected to the vehicle or a charger capable of discharge). Batteries discharged to a voltage lower than the lowest approved voltage may be damaged, resulting in loss of performance and potential fire when Batteries are charged.

Additional Guidelines and Warnings
-In the event of a crash, always quickly and safely disconnect and remove Batteries from the model. Then follow the previously listed safety procedures.
-In the internal contents of Batteries come into contact with your skin, wash the affected area(s) with soap and water immediately. If it comes into contact with your eye(s), flush them with generous amounts of water for 15 minutes, and seek medical attention.

Battery Limited Warranty - NOTICE
All instructions, warranties, and other collateral documents are subject to change at the sole discretion of Titan. For up to date product literature, visit www.titanflight.com

Warranty Period
Exclusive Warranty - Titan warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase by the Purchaser.

Limited Warranty
Titan reserves the right the change or modify this warranty without notice and disclaims all other warranties, express or implied
This warranty is limited to the original purchaser (“Purchaser”) and is not transferrable. REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products purchased from an authorized Titan dealer. Third-party transactions are not covered by this warranty. Proof of purchase is required for warranty claims.
Limitation - TITAN MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE THE PRODUCT. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET WITH REQUIREMENTS OF PURCHASER’S INTENDED USE.
Purchase Remedy - Titan’s sole obligation hereunder shall be that Titan will, at its option, replace any product determined by Titan to have defected in the event of a defect, this is the Purchaser’s exclusive remedy.
Replacement decisions are at the sole discretion of Titan. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of any part of the product. This warranty does not cover damage due to improper installation, operation, maintenance, or attempted repair by anyone.

TITAN DOES NOT INSPECT OR REPAIR BATTERIES, NEVER SHIP BATTERIES TO TITAN.

Damage Limits
TITAN SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.

Further, in no event, shall the liability of TITAN exceed the individual price of the Product on which liability is asserted. As Titan has no control over use, setup, final assembly, modification, or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup, or assembly the user accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated with the use of this product, you are advised to return this product immediately in new and unused condition to the place of purchase.

Law: This Agreement shall be construed, interpreted, and enforced according to Arkansas law, WITHOUT REGARD TO CONFLICTS OF LAWS PRINCIPLES, in any litigation, arbitration, or legal proceedings arising out of this Agreement.

DAS is short for "Dynamic Action System". It is a concise description of a system which produces dynamic motion that up until now only existed in everyone’s dream and was never materialized in electric guns. Kim Kwang Suk, DAS developer and GBLS founder, is a licensed architect who has been playing in BB games since 1994. Analyzing the guns with his design background, he wondered for 20 years why manufacturers could not make a BB gun more realistic. Finally, in order to find a solution of making an electric gun more like a real gun, he founded GBLS to develop DAS himself. He knows best about the complaints that you have with the guns as users. In fact, his desire for a more realistic electric gun tops all others. Kim Kwang Suk of GBLS proclaims “The Summit of Realism” motto to mark the triumphant arrival of DAS and now everyone can witness the result. Real modern rifles do not operate without the bolt carrier movement. All the AEG which have existed so far are just toy guns lacking the bolt carrier which is the heart of the gun. DAS was born out of this framework.

DAS mechanically controls the movement of the bolt carrier to achieve the same stroke as a real gun. DAS should be used in the same sequence of a real gun in order to fire consisting of the following steps: pull back the bolt carrier, check the chamber, advance the bolt carrier forward, and set to single-fire.
In a game that creates an environment similar to a real battlefield, everybody wonders what gun to utilize. In the well decorated game field, what product can shine brightly out of the various real equipment that you have equipped. Without hesitation, the answer is DAS.

Pull the charging handle backward to retract and lock the bolt carrier, insert the magazine, release the bolt carrier forward to load a BB into the chamber, after the trigger is pulled and the shot is fired, the bolt carrier will draw back and the recoil will hit your chest. If you set the fire selector to auto-fire and when you pull the trigger again, replica accessories will loosen due to the recoil from the bolt carrier, so you, my friend, will need real accessories. When the 60 rounds of BB run out and the bolt carrier retracts and locks, press on the magazine release button to eject the existing magazine from the gun and insert the new magazine. When the bolt catch is released, this allows the bolt carrier move forward, and it is ready to fire again.

You have to train to do these steps quickly to avoid getting hit by the enemy. Also, you must firmly hold the handguard or vertical grip to prevent the shots from scattering by the recoil when you fire the gun. The moment for your shooting skills to shine has arrived. The rifle we both dreamed about is right before our eyes. Now, let's enjoy for real!

"Let's Get Real! Now is time to play for Real!"
Airsoft has been popular for more than 30 years, and you probably spent hundreds, if not thousands of dollars purchasing antiquated airsoft guns to play your beloved games. However, Airsoft is about creating realism which cannot be achieved by using replica guns that shoot BBs with a boring
gearbox!
Now, the gun that all players dreamed about owning is available. Introducing, DAS (Dynamic Action System) is the most realistic AR electronic training arm platform. The size, heft, firing mechanism, and functions are almost identical compared to the real gun except using BB pellets as a projectile and operating by electronic battery.

You can contact us directly. Thank you for your support to GBLS USA!

Please allow up to two business days for us to reply your emails, and please check with your junk email folder,
because sometimes your email filtering may block our emails.

Our Business Hour M-F 9AM-8PM EST

Our online shop opens 24 hours 7 days. For customer service and order processing, please allow up to 2 business days for us to reply your enquiries and process your orders.

Gbls USA
1650 Sycamore Ave Suite 6A, Bohemia NY 11716
T 631 319 6496 
F 631 319 6497 
E info@gblsusa.com 

Description

Voltage: 11.1v
Capacity: 3000mAh
Connector: T-Plug (Dean)
Style: Nunchuck
C Rating: 16C (equivalent of 1600mAh 30C, a common Airsoft li-po variant)

Size: 19.5mm (0.77in) thick, 132mm (5.2in) long

No Puff
Titan Power batteries will never puff and become unsafe like lipo will that have been either neglected or simply aged over time.

No Memory
Titan Power batteries can be charged from empty or nearly full without damaging the battery. Even if your battery gets low and your device cannot cycle, the battery is still within is safe operating range and can be charged safely back to 100%.


More Capacity
Titan Power batteries can store on average 2-5 times the energy of other Airsoft batteries, keeping you in the working longer.

No Fade / Lasts Forever
Titan Power batteries can hold a charge for months and still be ready to use on game day. An extreme example is a pack used for testing, charged in 2012, which still holds 88% of its life in 2018. These packs can also be charged over 300 times and still store 80% of its original capacity.

 

LITHIUM ION SAFETY

Lithium-Ion batteries store a ton of energy, and while these can endure hard impacts, long drains of high power, etc, they do have their limits, and if pushed too hard, they can be very dangerous.

As a general rule, if you store them 30% charged in a cool, safe place away from anything flammable, charge them slowly and under supervision, discharge them at the rated C-ratings with proper ventilation/cooling, treat them nice and don't do anything crazy like shorting them out or crushing them, they will not cause any issues and last a very long time.

The full legal disclaimer is below:

Warning: procedures, which if not properly followed, create the probability of property damage, collateral damage, and serious injury. For the purposes of this document, Li-ion will be described as “Batteries”.


Handling and storage
-Never alter, puncture, or impact Batteries or related components.
-Do not directly connect the terminals with metal objects. This will short-circuit Batteries, resulting in heat and electrical discharge.
-Never store loose Batteries together, the Batteries’ terminals may contact one another causing a short circuit.
-Never expose batteries to extreme temperatures or direct sunlight. The temperature range must be between 40-120F (4-49C).
-Always verify voltage of Batteries that have been out of service for greater than six (6) months.
-Always charge/store Batteries in a non-conductive, fireproof container or bag.
-For best results, store Batteries at approximately 1/2 of the capacity listed on the batteries’ label.

Before the First Charge
-Make a visual and physical inspection of Batteries for any damaged or loose leads or connectors, damaged packaging, or other irregularities which may cause a short circuit and eventual fire.
-Verify that the positive terminal of the Batteries is connected to the positive terminal of the charger. Confirm polarity with a voltmeter if unsure.
-Check the voltage of Batteries using a voltmeter to make sure Batteries have the voltage of the capacity listed on the Batteries’ label.

Charging
Always refer to your charger’s manual for correct procedures and safety information. In addition to your charger's manual, the warnings and guidelines listed below must be followed to avoid possible property damage and injury.
-Always use a compatible balanced mode charger, specifically designed for the chemistry of the battery you are using.
-Always charge batteries in an open area away from flammable materials, liquids, and surfaces.
-Never charge Batteries inside of the model.
-Never charge Batteries that are hot to the touch (above 100F) DO NOT handle Batteries until they are cool.
-Always set the charger to proper cell count and/or voltage listed on Batteries’ labels.
-Never charge at a rate greater than 1/2C (Half the capacity of Batteries in amp hours)
-Always check the voltage of Batteries before each charge session in order to ensure they are at or above the minimum safe starting voltage. If starting voltage is below recommended levels then Batteries have been over-discharged or have experienced a failure and should NOT be charged.
-Never overcharge Batteries beyond the capacity listed on Batteries’ labels.

Safety
If any time Batteries become damaged, hot, or begin to swell, discontinue charging or discharging immediately. Quickly and safely disconnect the charger. Then place the Batteries in a safe, open area away from flammable materials in an approved Li-po bag to observe. After one hour, remove the Batteries from service. Do NOT continue to handle an attempt to use, or ship the Batteries. Failure to follow these procedures can cause damage to Batteries, personal property, or cause serious injury. Damaged or swollen Batteries can be unstable and very hot. DO NOT touch Batteries until they have cooled. Dispose of Batteries in the manner required by your city, county, state, or country. In the event of a fire, a Class D, dry chemical fire extinguisher must be used.

Discharging
-Never discharge Batteries at amperage rates higher than specified on Batteries’ labels.
-Never allow the temperature of Batteries to exceed temperatures advised by the manufacturer.
-Never discharge batteries to a voltage below which they are rated by the manufacturer when measured under load (connected to the vehicle or a charger capable of discharge). Batteries discharged to a voltage lower than the lowest approved voltage may be damaged, resulting in loss of performance and potential fire when Batteries are charged.

Additional Guidelines and Warnings
-In the event of a crash, always quickly and safely disconnect and remove Batteries from the model. Then follow the previously listed safety procedures.
-In the internal contents of Batteries come into contact with your skin, wash the affected area(s) with soap and water immediately. If it comes into contact with your eye(s), flush them with generous amounts of water for 15 minutes, and seek medical attention.

Battery Limited Warranty - NOTICE
All instructions, warranties, and other collateral documents are subject to change at the sole discretion of Titan. For up to date product literature, visit www.titanflight.com

Warranty Period
Exclusive Warranty - Titan warranties that the Products purchased (the “Product”) will be free from defects in materials and workmanship at the date of purchase by the Purchaser.

Limited Warranty
Titan reserves the right the change or modify this warranty without notice and disclaims all other warranties, express or implied
This warranty is limited to the original purchaser (“Purchaser”) and is not transferrable. REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products purchased from an authorized Titan dealer. Third-party transactions are not covered by this warranty. Proof of purchase is required for warranty claims.
Limitation - TITAN MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE THE PRODUCT. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET WITH REQUIREMENTS OF PURCHASER’S INTENDED USE.
Purchase Remedy - Titan’s sole obligation hereunder shall be that Titan will, at its option, replace any product determined by Titan to have defected in the event of a defect, this is the Purchaser’s exclusive remedy.
Replacement decisions are at the sole discretion of Titan. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of any part of the product. This warranty does not cover damage due to improper installation, operation, maintenance, or attempted repair by anyone.

TITAN DOES NOT INSPECT OR REPAIR BATTERIES, NEVER SHIP BATTERIES TO TITAN.

Damage Limits
TITAN SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY.

Further, in no event, shall the liability of TITAN exceed the individual price of the Product on which liability is asserted. As Titan has no control over use, setup, final assembly, modification, or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup, or assembly the user accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated with the use of this product, you are advised to return this product immediately in new and unused condition to the place of purchase.

Law: This Agreement shall be construed, interpreted, and enforced according to Arkansas law, WITHOUT REGARD TO CONFLICTS OF LAWS PRINCIPLES, in any litigation, arbitration, or legal proceedings arising out of this Agreement.

Video

DAS Features

DAS is short for "Dynamic Action System". It is a concise description of a system which produces dynamic motion that up until now only existed in everyone’s dream and was never materialized in electric guns. Kim Kwang Suk, DAS developer and GBLS founder, is a licensed architect who has been playing in BB games since 1994. Analyzing the guns with his design background, he wondered for 20 years why manufacturers could not make a BB gun more realistic. Finally, in order to find a solution of making an electric gun more like a real gun, he founded GBLS to develop DAS himself. He knows best about the complaints that you have with the guns as users. In fact, his desire for a more realistic electric gun tops all others. Kim Kwang Suk of GBLS proclaims “The Summit of Realism” motto to mark the triumphant arrival of DAS and now everyone can witness the result. Real modern rifles do not operate without the bolt carrier movement. All the AEG which have existed so far are just toy guns lacking the bolt carrier which is the heart of the gun. DAS was born out of this framework.

DAS mechanically controls the movement of the bolt carrier to achieve the same stroke as a real gun. DAS should be used in the same sequence of a real gun in order to fire consisting of the following steps: pull back the bolt carrier, check the chamber, advance the bolt carrier forward, and set to single-fire.
In a game that creates an environment similar to a real battlefield, everybody wonders what gun to utilize. In the well decorated game field, what product can shine brightly out of the various real equipment that you have equipped. Without hesitation, the answer is DAS.

Pull the charging handle backward to retract and lock the bolt carrier, insert the magazine, release the bolt carrier forward to load a BB into the chamber, after the trigger is pulled and the shot is fired, the bolt carrier will draw back and the recoil will hit your chest. If you set the fire selector to auto-fire and when you pull the trigger again, replica accessories will loosen due to the recoil from the bolt carrier, so you, my friend, will need real accessories. When the 60 rounds of BB run out and the bolt carrier retracts and locks, press on the magazine release button to eject the existing magazine from the gun and insert the new magazine. When the bolt catch is released, this allows the bolt carrier move forward, and it is ready to fire again.

You have to train to do these steps quickly to avoid getting hit by the enemy. Also, you must firmly hold the handguard or vertical grip to prevent the shots from scattering by the recoil when you fire the gun. The moment for your shooting skills to shine has arrived. The rifle we both dreamed about is right before our eyes. Now, let's enjoy for real!

Play for Real!

"Let's Get Real! Now is time to play for Real!"
Airsoft has been popular for more than 30 years, and you probably spent hundreds, if not thousands of dollars purchasing antiquated airsoft guns to play your beloved games. However, Airsoft is about creating realism which cannot be achieved by using replica guns that shoot BBs with a boring
gearbox!
Now, the gun that all players dreamed about owning is available. Introducing, DAS (Dynamic Action System) is the most realistic AR electronic training arm platform. The size, heft, firing mechanism, and functions are almost identical compared to the real gun except using BB pellets as a projectile and operating by electronic battery.

Contact US

You can contact us directly. Thank you for your support to GBLS USA!

Please allow up to two business days for us to reply your emails, and please check with your junk email folder,
because sometimes your email filtering may block our emails.

Our Business Hour M-F 9AM-8PM EST

Our online shop opens 24 hours 7 days. For customer service and order processing, please allow up to 2 business days for us to reply your enquiries and process your orders.

Gbls USA
1650 Sycamore Ave Suite 6A, Bohemia NY 11716
T 631 319 6496 
F 631 319 6497 
E info@gblsusa.com 

Customer Reviews

Based on 1 review Write a review

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods